1. Hong Kong
  2. All 3M Products
  3. Lubricants
  4. General Purpose Lubricants
  5. 3M™ Spray Lube, 08878, 11 oz, 12 per case

3M™ Spray Lube, 08878, 11 oz, 12 per case

  • 3M ID 60410009579

High quality silicone lubricant works for many applications

Lubricant eliminates rubber squeaks and prevents sticking

Formula contains no petroleum oils to stain fabrics

View more details

Details

Highlights
  • High quality silicone lubricant works for many applications
  • Lubricant eliminates rubber squeaks and prevents sticking
  • Formula contains no petroleum oils to stain fabrics
  • Cold hardy formula will not freeze at -28°F
  • Heat resistant formula will not degrade at 350°F

3M™ Silicone Lubricant eliminates rubber squeaks, prevents sticking and seals out moisture. Our lubricant contains no petroleum oils to stain fabrics. Formulated for extreme conditions, it will not freeze at -28°F nor degrade at 350°F. Silicone lubricant is available in both wet and dry formulas.

One Lubricant for Many Applications

3M™ Silicone Lubricant delivers the versatility to work in many applications. Use our product for lubricating moving parts; eliminating squeaks caused by friction; protecting against rust and corrosion; sealing out moisture; preventing buildup of glues, waxes, inks and paints; preserving plastics, rubber and leather; and prolonging the life of cutting tools.



Resists the Extremes of Hot and Cold

Our silicone lubricant handles the extremes of temperature ranges, making it a perfect choice for automotive applications where conditions can be harsh. The lubricant resists freezing down to -28°F and will not degrade at temperatures as high as 350°F. You can rely on our lubricant delivering high performance in frigid cold days of winter and blistering hot days of summer.



Directions for Use:





Turn spray tip so opening points to dot on rim of can.

Hold can upright and push actuator on top of can all the way down to apply a uniform spray. Position the actuator away from your face before spraying.

If using the extension tube, insert it in to the actuator using a twisting motion.

Best results are obtained when material is at room temperature. Higher temperatures increase the pressure in the can, and lower temperatures reduce the pressure.

Hold can 8" to 10" from surface to be sprayed. Apply evenly and use sparingly.

For hard to reach or small surfaces, use the extension tube.

On rubber, leather, and vinyl; apply and wipe with a cloth.





Applications for Wet Formula





Lubricates doors, "T" tops, sunroofs, hatchbacks and trunk weather-stripping

Protects rubber parts

Preserves plastic and vinyl surfaces

Seals out moisture





Applications for Dry Formula





Lubricates plastic dash parts

Protects door weather strips

Provides window channel lubrication

Lubricates door locks

Typical Properties