常見問題

有疑問?您不是唯一一個。閱讀3M無痕™常見問題(和解答),了解關於如何使用3M無痕™產品的更多信息。

webLoaded = "false"

Surfaces

  • Painted, stained or varnished wood, glass, tile, painted cinder block, plaster, metal, and painted wallboard.


    Command™ Outdoor Products can also be used on smooth, sealed and finished surfaces including vinyl siding and fences, doors, windows, decks, gutters and trim. The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood.

  • No. Command™ Products are intended for mostly smooth surfaces such as those listed above. However, our products will stick to painted, smooth cinder block (the type found inside many school and office buildings).

  • Paint should be fully cured (check paint can for manufacturer's cure time) before using Command Products. We recommend waiting a week before use on fresh paint. Also, alcohol may remove or dull the surface of fresh paint.

  • No. Most wallpapers are too delicate and can tear when adhesives are applied.

  • It is okay to use Command™ Products if the glass is not exposed to direct sunlight and not flooded with water. For example: Do not use inside or outside on south or west windows. For glass shower doors use our special Water-Resistant line of products (blue strip) which are clearly marked on our packaging.


    However, all Command™ Outdoor Products can be used on windows that have direct exposure to sunlight. These products are UV-resistant.

  • Due to weather temperature extremes, only Command™ Outdoor Products can be used on automobiles windows.

webLoaded = "false"

Climate and Temperature

webLoaded = "false"

Product Information and Use

Follow Command™ 無痕™ 掛鈎及膠貼 Brand
無痕™ Command™ 為3M註冊商標
更改瀏覽區域
中國香港特別行政區 - English | 中文