1. 所有 3M 產品
  • 3M™ Finesse-It™ SRC Machine Polish, 05927, Quart, 6 per case
  • 3M™ Finesse-It™ SRC Machine Polish, 05927, Quart, 6 per case

    3M ID 60455070726
    • Restores shine and clarity to scratch-resistant clear coats (SRCs)
    • Formulated to remove minor scratches and light oxidation on OEM clear coats and paints
    • Can remove microfine scratches up to sanding grade 1500
    • Use with 3M abrasive discs and soft interface pads
     更多
    詳情
    • Restores shine and clarity to scratch-resistant clear coats (SRCs)
    • Formulated to remove minor scratches and light oxidation on OEM clear coats and paints
    • Can remove microfine scratches up to sanding grade 1500
    • Use with 3M abrasive discs and soft interface pads

    Our 3M™ Finesse-It™ SRC Machine Polish is formulated as part of a full system to remove defects from scratch resistant clear coats (SRC) in collision repair. When used with 3M fine grade finishing discs and soft interface pads, this polish removes microfine scratches and light oxidation from tough OEM clear coats and fully cured paints, restoring shine and clarity to finished automotive surfaces.

    Restoring Scratch-Resistant Clear is Easier than You Think
    When scratch resistant OEM clear coat develops swirl marks and starts to fade, our 3M™ Finesse-It™ SRC Machine Polish is a large part of bringing it back to its former luster. This polish, for use with ultrafine 3M abrasive discs and soft interface pads, is formulated specifically to remove minor scratches and light oxidation on O.E.M. and fully cured automotive paints. The polish contains aluminum oxide, a common mineral abrasive, and can remove microfine sand scratches up to grade 1500 as well as swirl marks and light oxidation from SRC.<br/>

    For best results during spot repair on OEM clear coats, use Finesse-It™ SRC Machine Polish with our Hookit™ Finishing Disc grade P1500 for removing defects and our 3M™ Trizact™ Hookit™ Foam Disc grade 3000 for scratch refinement. Technicians should also use soft interface pads in any SRC application.<br/><br/>

    About our Finesse-It™ Products
    3M™ Finesse-It™ products are specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-It™ products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.

    Better Science for Better Finishing from 3M
    3M is committed to helping collision repair professionals perform in an ever-growing range of applications that simply were not possible before, including scratch refinement and defect removal in SRCs and fully cured auto paint systems. Our Finesse-It™ SRC Machine Polish is another example of how 3M applies science to life – specifically to the lives of collision repair technicians seeing speed, efficiency and consistently professional results.

    關注我們
    以上品牌為3M註冊商標。
    更改瀏覽區域
    中國香港特別行政區 - English | 中文