Forsus™ Class II Correction System
- 3M ID B5005051009
3M Health Care 现在是 Solventum。在 Solventum.com 上了解我们如何实现更好、更智能、更安全的医疗保健，以改善生活
詳細信息
產品亮點
- A simple one-step installation into the headgear tube
- A telescoping coaxial spring designed to allow for enhanced patient jaw opening
- A comfortable stainless steel mechanism that does not bow out into the cheek
- Low spring stresses to give the Forsus spring a longer, more fatigue-resistant life
- Open spring design to facilitate good oral hygiene
- One appointment installation, chairside, with no lab work required
- Independent left and right components; install only one side if desired
The Forsus™ Fatigue Resistant Device is the optimal solution for Class II Correction, the automatic, hygienic & comfortable way to continuously apply light force.
Class II Correction is a common orthodontic case requirement. The options for Class II treatment have traditionally presented a difficult decision. Choices were limited to fixed intraoral devices with known breakage concerns, or other appliances – including headgear – that require patient compliance.
The Forsus™ Fatigue Resistant Device, now with more than ten years of clinical use and over one million patients treated, overcomes these concerns and limitations.
Increased Versatility with Three Installation Options
Forsus™ L-pin Module
The L-pin module allows for more flexible installation options and movement in the mouth. It can be used with a gingival or occlusal headgear tube. The left and right sides are universal. It is also used with the Forsus™ Wire Mount, permitting installation without a molar tube.
Forsus™ Fatigue Resistant Device EZ2 Module
The EZ2 module allows for more consistent installation and automatically prevents the spring from pivoting toward the cheek. The EZ2 module can be used only with an occlusal headgear tube and has permanently marked indicators for the left and right sides.
Forsus™ Wire Mount
The Forsus™ Wire Mount slides onto the archwire and provides an attachment option for the L-pin Spring Module, thus eliminating the need for molar bands and making it easier to incorporate the Forsus Device mid-treatment.
The Forsus™ Fatigue Resistant Device, now with more than ten years of clinical use and over one million patients treated, overcomes these concerns and limitations.
Increased Versatility with Three Installation Options
Forsus™ L-pin Module
The L-pin module allows for more flexible installation options and movement in the mouth. It can be used with a gingival or occlusal headgear tube. The left and right sides are universal. It is also used with the Forsus™ Wire Mount, permitting installation without a molar tube.
Forsus™ Fatigue Resistant Device EZ2 Module
The EZ2 module allows for more consistent installation and automatically prevents the spring from pivoting toward the cheek. The EZ2 module can be used only with an occlusal headgear tube and has permanently marked indicators for the left and right sides.
Forsus™ Wire Mount
The Forsus™ Wire Mount slides onto the archwire and provides an attachment option for the L-pin Spring Module, thus eliminating the need for molar bands and making it easier to incorporate the Forsus Device mid-treatment.
規格
