Our 3M™ Accuspray™ HGP Spray Gun Kit features an HVLP gravity pressurized spray gun body built specifically for applying high viscosity fluids in collision repair. The kit includes an Accuspray™ HGP pressurized spray gun and two each of 1.8 mm and 2.0 mm atomizing heads that allow for full, consistent spray patterns and low overspray. The kit is ideal for use with Accuspray™ H/O Pressure Cups.
Durable, Lightweight Equipment for Applying Medium-Heavy CoatingsFeaturing our Accuspray™ HGP spray gun body and replaceable atomizing heads, our 3M™ Accuspray™ HGP Spray Gun Kit provides the basis for efficient and effective application of high volume, high viscosity coatings. This kit contains the lightweight gun body, two 1.8 mm replaceable atomizing heads, two 2.0 mm replaceable atomizing heads and an air control valve. It is designed specifically for use with the 3M™ PPS™ system featuring the H/O Pressure Cups (sold separately). This kit forms a premium HVLP gravity pressurized application system for gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings. While this gun is packaged with the larger 1.8 mm and 2.0 mm atomizing heads, the smaller size atomizing heads (1.2, 1.3 and 1.4 mm) will also work. A smooth, consistent spray pattern lets you build mil thicknesses quickly, and greatly limits overspray for reduced product waste and less cleanup time. A Spray System That Pays OffThe atomizing heads used with the Accuspray™ HGP Spray Gun are a big part of our 3M™ Accuspray™ System for automotive collision repair. Replaceable atomizing heads are see-through so it’s easy to see when the head is clean, and the spray guns perform like new every time the atomizing head is replaced – the equivalent of a new spray gun, at a fraction of the cost. The benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. The end result: cleaner, more productive, more profitable collision repair operations.Accuspray™ and Our PPS™ SystemThe 3M™ Paint Preparation System is an all-in-one closed system for mixing/measuring, filtering, sealing and protecting.No Need to Spend on Extra Mixing Cups, Filters and StrainersThis system eliminates the inefficient process of mixing paint and other materials separately and transferring them through filters and other equipment where product gets left behind, unused. Instead, paint and other materials are mixed and sprayed out of the same cup with a PPS™ liner, lid and built-in filter. You simply place a disposable liner within a re-usable paint cup. Then mix the paint in the PPS™ liner, snap the disposable lid (with built-in filter) in place and attach the locking collar to complete the PPS™ System. With just a quick quarter-turn, the assembly easily attaches to the spray gun body. Once you’re finished spraying, simply remove the liner from the cup and discard it. It’s that simple.And each PPS™ cup can be used for temporary protection of liquid coating materials for continued use – just use the included sealing plug. This system lets painters mix less paint, drastically reduce their solvent use, and spend less time cleaning spray guns and cups. It even lets them spray in any direction, including upside down, for consistent coverage and improved material usage. All told, the PPS™ system can improve operator efficiency by as much as 15%, and can save up to 70% on solvent usage alone. All of this adds up to a very clear cost savings across your operation.The Science of Better Spray Systems from 3MWe put decades of scientific and real-life study into our 3M™ Accuspray™ ONE Spray Gun Kit to help make spray application easier and save collision repair and other professionals time and money at every step. Every feature – from the lightweight composite spray gun body that eliminates maintenance kits to its replaceable atomizing heads – is another example of what makes every 3M product successful: Science. Applied to Life. ™ (此產品只提供英文版本)