1. 香港
  2. 所有 3M 產品
  3. 接著劑
  4. 密封劑與填料
  5. 密封膠
  6. 3M™ Factory-Match Seam Sealer, 08323, 200 mL, 6 per case

3M™ Factory-Match Seam Sealer, 08323, 200 mL, 6 per case

3M ID 60455030563UPC 4891203301355
  • Metered static mixing with dual syringe cartridge eliminates the difficulty and mess of manual mixing
  • High performance two-part urethane seals vertical or horizontal seams to match OEM seals
  • Flows slightly and softens on the edges without tooling for a rounded appearance
  • Quick cure time and non-sag property aids during vertical applications
 更多
瀏覽所有細節
詳情
  • Metered static mixing with dual syringe cartridge eliminates the difficulty and mess of manual mixing
  • High performance two-part urethane seals vertical or horizontal seams to match OEM seals
  • Flows slightly and softens on the edges without tooling for a rounded appearance
  • Quick cure time and non-sag property aids during vertical applications
  • Black
  • To create a ribbon bead, use a 3M OEM Sealer Tip - 3/8 inch Flat PN 08204

We designed 3M™ Factory-Match Seam Sealer using two part urethane technology to provide a tough flexible material for the sealing of joints on primed or painted substrates such as steel or aluminum enclosures. This material provides excellent flexibility and elongation properties along with a medium/high viscosity and produces a slight flow-out after application.

Eliminate DowntimeSingle component sealers require significant dry time before components can be handled or further processed in your shop. Our high-performance 3M™ Factory-Match Seam Sealer operates with a two-part cartridge and nozzle that self-mixes with a perfect formulation every time allowing for fast easy application and quicker cycle time than with one part sealers. 3M™ Factory-Match Seam Sealer may be top coated with paints in 45 minutes under normal conditions.Match OEM AppearancesThis professional-quality black seam sealer can be used to seal vertical or horizontal seams on automotive surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Its slight flow-out softens on the edges, without tooling, giving a rounded appearance. This flexible rounded seam seal is suitable for duplicating factory door skin seams and matching OEM beads.Durable, Fast-Cure Formula Creates a High Quality SealOur flexible formula works within a wide range of temperatures with no shrinking or cracking to achieve strong, durable construction. It offers a fast setup time of 10 minutes, decreasing downtime and allowing technicians to continue repair procedures quicker for increased productivity. Moreover, the fast-cure formula means there is a limited time of uncured product on the car and the risk of damaging the seam by disturbing uncured seam sealer is greatly reduced. This enables technicians to quickly achieve a long-lasting, high quality seam seal.Using the Seam Sealer Effectively3M™ Factory-Match Seam Sealer can be used with the following 3M™ Applicators: PN 08117 (manual), PN 08571 (manual), and PN 09930 (pneumatic). Also use 3M™ Mix Nozzle: PN 08193 (6/bag), PN 8194 (50/box) and 3M™ OEM Sealer Tip PNs 08201 – 08205.The following times have been determined with ambient air temperature and substrate temperature at 70°F (21°C) and are considered typical values: WORK TIME: 10 minutes MIX NOZZLE DWELL TIME: 6 minutes CURE TIME: 4 hours PAINT TIME: 45 minutes TENSILE STRENGTH: 2517 PSI ELONGATION: 390%3M best practice is that all sealers, unless designated specifically for use on bare metal, be applied to properly prepared automotive paint or primer. Apply only to surfaces primed with a 2K urethane, 2K epoxy primer, or clean, sanded paint. Acid etch primers should never be in direct contact with seam sealer. Prior to application, scuff primed surface with a Scotch-Brite™ General Purpose Hand Pad, PN 07448 (Ultrafine).3M Science Meets the Needs of Automotive Professionals3M used the technical properties of two-part urethane to create a sealer that combines toughness with flexibility. 3M™ Factory – Match Seam Sealer is ideal for lasting seam sealing protection on many different surfaces, and allows technicians to expertly recreate OEM seam sealer appearances. This formula represents another way 3M applies science to improve working conditions and productivity in the automotive industry. (此產品只提供英文版本)